BUILDINGSIGNS.COM

SPRINKLER VALVE ROOM(4x12,RED,ALUMINUM)

Write a Review
UPC:
731559583972
Availability:
Usually Ship Within 2 days
  • SPRINKLER VALVE ROOM
  • SIGN SPRINKLER VALVE ROOM
  • SPRINKLER VALVE ROOM
  • SPRINKLER VALVE ROOM
  • SPRINKLER VALVE ROOM SIGN
  • SIGN SPRINKLER VALVE ROOM
  • SIGN SPRINKLER VALVE ROOM
  • SPRINKLER VALVE ROOM SIGNAGE
  • SPRINKLER VALVE ROOM SIGN
  • SPRINKLER VALVE ROOM SIGN
  • SIGNAGE SPRINKLER VALVE ROOM
  • SPRINKLER VALVE ROOM SIGNAGE
  • SPRINKLER VALVE ROOM SIGNAGE
  • SIGNAGE SPRINKLER VALVE ROOM
  • SIGNAGE SPRINKLER VALVE ROOM
$10.99
Frequently bought together:

Description

SPRINKLER VALVE ROOM

Size 4 Inch x 12 Inch

Sign Thickness 0.4MM

Sign letters color: White

Sign background color: Red Sign .

Sign material: Aluminum. Reflective Sign

A sprinkler valve room is a designated space within a building that houses the valves responsible for controlling the water flow to the building's fire suppression sprinkler system. This room typically contains a series of valves, each of which controls the water flow to a specific area of the building. In the event of a fire, the valves can be manually or automatically activated to release water through the sprinkler system, helping to contain and extinguish the flames.

The size of a sprinkler valve room can vary depending on the size of the building and the complexity of the sprinkler system. A 4x12 room is a relatively small space that could accommodate a limited number of valves. This size of room would be appropriate for smaller buildings or buildings with less complex sprinkler systems.

The color of the sprinkler valve room is often used to indicate its purpose and contents. In this case, a red color is used to signify that the room contains fire suppression equipment. This can be helpful for emergency res ponders who need to quickly locate and access the valves in the event of a fire. The use of a standardized color scheme for fire safety equipment helps to ensure that it is easily recognizable and consistent across different buildings and locations.

Aluminum is a common material used in the construction of sprinkler valve rooms. It is lightweight and durable, making it a practical choice for a room that may need to withstand significant pressure and force during an emergency. Additionally, aluminum is non-corrosive, which means that it is less likely to rust or degrade over time, helping to ensure that the valves remain in good working order and are easily accessible when needed.

DISCLAIMER These codes may not be the most recent version. The State / federal or other regulation department may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources. The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. WE make no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase. For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney

Shipping and Handling Cost: 

Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

View AllClose

Warranty Information

All products are warrantied by HPDSIGNS.NYC to be free of defects in material or workmanship, at the time of shipment. HPDSIGNS.NYC liability shall be limited to replacement of the product, if it can be determined that the product was defective at the time of shipment. Defective products, subject to the inspection by HPDSIGNS.NYC, will be replaced or repaired on a no charge basis. Damage caused by, accidents, or improper use, is the responsibility of the Buyer. HPDSIGNS.NYC is not responsible for misuse of the products, or if the Buyer is unable to use the product. This warranty is in lieu of any other warranty expressed or implied. All shipping costs related to returning the product to the Manufacturer for inspection will be prepaid by the buyer. Shipping costs will be reimbursed if parts are determined to be defective. Shipping non-defective parts back to the Buyer will be paid by the Buyer. All expenses, losses in revenue, and labor charges arising or originating from the failure of defective parts will be borne by the Buyer. The requirements for sign content are determined by intended use and by applicable regulation. BUYER is responsible for determining the appropriate content for a sign. HPDSIGNS.NYC makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. The Warranty excludes natural aging of the unit, discoloration, ordinary wear and tear, ordinary weathering, sunlight fading, or rust. It excludes staining caused by mold, mildew or tree sap and damage caused by animals including insects, vermin or household pets. The warranty does not cover damage caused by Acts of Nature including but not limited to: wind in excess of 65 mph; tornado; hurricane; microburst; hail; flood; blizzard; extreme heat; pollution or fire events. The following actions void the warranty: improper assembly; use above intended and reasonable capacity; misuse; abuse; modification; cleaning with abrasive tools, exposing the unit to heat sources and vandalism. Painting, sandblasting, cleaning with harsh chemicals not recommended voids the warranty . Modification of the original product voids all warranties. HPDSIGNS.NYC assumes no liability for any modified product .HPDSIGNS.NYC is not responsible for: loss of use of the unit; labor for repair; inspection fees or disposal costs. THIS WARRANTY IS NONTRANSFERABLE. IT IS VALID FOR 90 DAYS FROM PURCHASE DATE. THE WARRANTY IS VOIDED AFTER 90 DAYS. HPDSIGNS.NYC AND BUILDINGSIGNS.COM HEREUNDER IS LIMITED SOLELY TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR PART AND IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM ANY DEFECT IN MATERIAL OR WORKMANSHIP OR FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. DISCLAIMER These codes may not be the most recent version. The State / federal or other regulation department may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources. The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. WE make no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase. For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.
View AllClose

Related Products

xyz1